RSSRSS

Technology

Technology
Home  ›   Technology

Equipment


 

aluminum die-casting facilities 
       
 

 

aluminum extrusion  facilities 
       
 



aluminum extrusion  facilities 
     
 



CNC machining  facilities
       
 



CNC machining  facilities
   



metal stamping precision  facilities 
       



metal stamping precision  facilities
       
 



metal stamping precision  facilities
   



QC room & CMM facilities


robot welding & laser cutting system
     


x-ray inspection system
   


Process

Forged

A place or establishment where iron or other metals are wrought by heating and hammering; especially, a furnace, or a shop with its furnace, etc., where iron is heated and wrought; a smithy.

Galvenized

Galvanized Sheet is carbon steel sheet coated with zinc on two sides by the continuous hot-dip process. The process results in a layer of zinc on each side of the steel sheet that is tightly adhering to the steel through the formation of an iron-zinc alloy bonding layer that is formed by a diffusion process while the heated steel strip is in contact with the molten zinc.

Gravity Casting

A technique limited to using large diameter filaments with adequate separation in order to avoid clustering and ensure good metal wetting of the fiber. Also known as VACUUM CASTING. 

Powdercoat

Powder coating poses no risk to the air quality because, unlike paint, it has no solvent emissions. As well as being environmentally friendly, powder coating offers a new standard of quality control by providing higher uniformity of thickness and color consistency than wet paints. Powder coatings are cured at higher temperatures which ensure tougher finishes.
Powder coating is a viable, superior surfacing choice to wet paint. If you use wet paint in your manufacturing process, consider implementing powder coating to lower your costs, improve your product's durability, and lower your company's impact on the environment.

Die casting

Die casting is a metal casting process that is characterized by forcing molten metal under high pressure into a mould cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mold during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead,pewter and tin based alloys. Depending on the type of metal being cast, a hot- or cold-chamber machine is used.
The casting equipment and the metal dies represent large capital costs and this tends to limit the process to high volume production. Manufacture of parts using die casting is relatively simple, involving only four main steps, which keeps the incremental cost per item low. It is especially suited for a large quantity of small to medium sized castings, which is why die casting produces more castings than any other casting process. Die castings are characterized by a very good surface finish (by casting standards) and dimensional consistency.

Materials

Chrome Steel
Chrome Steel is a universal material for many applications. Chrome steel contain chromium and due to through hardening has an excellent surface quality and high load bearing. Throughout the manufacturing process, statistical process control assures tolerance accuracy, fine surface finish and a consistent high quality.

CRS
Alloy Steel Cold Roll :
Steel is iron that is combined with other elements such as carbon, manganese and silicon. It falls into one of two families: carbon steel or alloy steel. Alloy steels contain added elements that cause the steel to exhibit enhanced properties when heat treated.

TPU (Thermoplastic Polyurethane)
Thermoplastic Polyurethane (hereinafter referred to as TPU) refers to general Pu elastic body.It is one type of thermoplastic man made rubber. It does not cause any damage to human and the evironment. It is the optimal environment friendly material to replace PVC as an environment protection measure.
Due to its many advantages, TPU has extensive applications.Other than film, it may be used in the materials for shoes,leather bags,garments, medical supplies, national defence products, sports products and industrial products, It is especially practical in textiles and garment processing fitting.

TPR
The formal definition of a Thermoplastic Rubber or Elastomer is a polymer blend or compound which above its melt temperature, exhibits a thermoplastic character that enables it to be shaped into a fabricated article and which, within its design temperature range, possesses elastomeric behaviour without cross-linking during fabrication. This process is reversible and the products can be reprocessed and remoulded.


Contact Detail

CEO:Tony Liu
Contact:Tony Liu
Lydia Jan (Sales Manager)
Address:No.6,DAHU LN.,BEITUN DIST.,TAICHUNG CITY 40662,TAIWAN
TEL:886-4-22399769
FAX:886-4-22392721
Email: service@metal-wares.com
Lydia@metal-wares.com
URL:http://www.metal-wares.com
ZIP:40662